上海乾拓贸易有限公司

　　G46-2-02-C,SMC压力表价格

　　Standard Specifications

　　±5% F.S. (Full span)

　　Zinc die-casted (Black graphite coated)

　　Zinc die-casted (Black graphite coated)

　　? Caution on handling: When drain or oil, etc.

　　gets into the gauge, it may result in a malfunction.

　　Note 1) When mounting a pressure gauge,

　　A pressure switch

　　电话：

　　传真：转8008

　　手机：

　　function has been addedto the gauge.

　　 The pressure switch is

　　equipped with a light for

　　verifying operation.

　　 The pressure gauge is

　　equipped with a limitindicator.

　　 To be used for verifying

　　the supply pressure.

　　use caution not to tighten excessively. Excessive tightening will

　　cause product to be damaged. Use a pipe

　　tape for sealing. Recommended tightening torque is

　　between 3 and 4 N·m for R 1/16 and 7 and 9 N·m for R 1/8.

　　Note 2) Water cannot be used as an operating

　　fluid. Because the clearance gap of the air passage of the

　　Bourdon tube is very small. Water

　　will block the gap and cause a malfunction.

　　G46-2-02-C,SMC压力表价格